Post by account_disabled on Jan 30, 2024 3:45:35 GMT
MS-1000 series: two micro-ATX cases from Sharkoon! February 23, 2022by Martin 6 Sharkoon announces the arrival of two new cases with the MS-1000 series. Indeed, we find MS-Y1000 and MS-Z1000, which are two almost identical cases. Only the front panel changes from one model to another! MS-1000 series: two original micro-ATX cases! Sharkoon MS-1000 seriesWith its two cases, Sharkoon announces two cases that are able to accommodate micro-ATX and mini-ITX motherboards.
These cases have reduced C Level Executive List dimensions of 170 (W) x 425 (D) x 362 (H) mm. The weight is very well maintained at 5.7 kg. The interior of the chassis is very original as the power supplyfront-panel-mounted power supply. However, do not panic, because you can choose a 16 cm ATX block. There are no major limitations in terms of power. For the rest of the components, especially for the CPU cooling unit, things get more complicated. In this case, we have 135 mm of free space, so we have to either switch to water cooling or work with a 92 mm fan or up flow.
Finally, on the GPU side, without fans in front, we find a clearance of 36 cm, against 35.5 cm with the fan. MS-1000 series By the way, let's talk about ventilation, because we have the right to four pre-installed mills. Indeed, there is a small 80 mm on the back, two 120 mm on the top and we find the last 120 mm on the bottom. We can also add a second 120mm one at the bottom and the last one at the front. However, for water cooling, you have to be satisfied with a slot of 240 mm on top with a thickness of 55 mm (radiator + fans).
These cases have reduced C Level Executive List dimensions of 170 (W) x 425 (D) x 362 (H) mm. The weight is very well maintained at 5.7 kg. The interior of the chassis is very original as the power supplyfront-panel-mounted power supply. However, do not panic, because you can choose a 16 cm ATX block. There are no major limitations in terms of power. For the rest of the components, especially for the CPU cooling unit, things get more complicated. In this case, we have 135 mm of free space, so we have to either switch to water cooling or work with a 92 mm fan or up flow.
Finally, on the GPU side, without fans in front, we find a clearance of 36 cm, against 35.5 cm with the fan. MS-1000 series By the way, let's talk about ventilation, because we have the right to four pre-installed mills. Indeed, there is a small 80 mm on the back, two 120 mm on the top and we find the last 120 mm on the bottom. We can also add a second 120mm one at the bottom and the last one at the front. However, for water cooling, you have to be satisfied with a slot of 240 mm on top with a thickness of 55 mm (radiator + fans).